Document Type
Journal Article
Publication Title
International Journal of Mechanical Sciences
Volume
283
Publisher
Elsevier
School
Centre for Sustainable Energy and Resources / School of Engineering
Abstract
The strength criterion of rock is essential for stability control and safety design of geotechnical engineering constructions. Due to its widespread adoption, the Mohr–Coulomb (M-C) criterion is prominent among strength criteria. However, the M-C criterion is constrained by three significant limitations: it fails to capture the nonlinear strength response, overlooks the critical state, and disregards σ2. This study introduces a novel Stress-dependent Instantaneous Friction angle and Cohesion (SIFC) model for the M-C criterion to represent the convex strength envelope of intact rock, covering the spectrum from non-critical to critical states. In pursuit of this objective, an innovative approach for calculating these instantaneous shear parameters at each corresponding σ3 is initially introduced. By examining the confining pressure dependency of the instantaneous friction angle and cohesion, the SIFC model is derived and introduced to the M-C criterion. The SIFC-enhanced M-C criterion, utilizing parameters obtained from triaxial tests under lower σ3, delineates the complete non-linear strength envelope in (σ1, σ3) space, covering brittle to ductile behavior. This criterion is then extended to polyaxial stress conditions. Validation through triaxial test data confirms that the SIFC-enhanced M-C criterion accurately reflects the strength characteristics of the tested rocks.
DOI
10.1016/j.ijmecsci.2024.109652
Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.
Comments
Li, H., Pel, L., You, Z., & Smeulders, D. (2024). Stress-dependent instantaneous cohesion and friction angle for the Mohr–Coulomb criterion. International Journal of Mechanical Sciences, 283. https://doi.org/10.1016/j.ijmecsci.2024.109652