Submissions from 2015
Service class resource management for green wireless-optical broadband access networks (WOBAN), Maha Ahmed, Iftekhar Ahmad, and Daryoush Habibi
Impingement pressure characteristics of swirling and non-swirling turbulent jets, Zahir U. Ahmed, Yasir M. Al-Abdeli, and Ferdinando G. Guzzomi
The effect of inflow conditions on the development of non-swirling versus swirling impinging turbulent jets, Zahir U. Ahmed, Yasir M. Al-Abdeli, and Miccal T. Matthews
Assessment of Artificial Neural Networks and IHACRES models for simulating streamflow in Marillana catchment in the Pilbara, Western Australia, Matin Ahooghalandari, Mehdi Khiadani, and Ganesh Kothapalli
Propagation of measurement uncertainty in spatial characterisation of recreational fishing catch rates using logistic transform indicator kriging, Eric Aidoo, Glenn A. Hyndes, and Karina Ryan
Evaluation of geostatistical estimators and their applicability to characterise the spatial patterns of recreational fishing catch rates, Eric N. Aidoo, Ute Mueller, Pierre Goovaerts, and Glenn A. Hyndes
Comparative analysis of multiple kernel learning on learning emotion recognition, Oryina Kingsley Akputu, Yunli Lee, and Kah Phooi Seng
Review of laboratory swirl burners and experiments for model validation, Yasir M. Al-Abdeli and Assaad R. Masri
Multivariate detection and attribution of land-cover changes in the Central Pilbara, Western Australia, Masoomeh Alaibakhsh, Irina Emelyanova, Olga Barron, Alireza Mohyeddin, and Mehdi Khiadani
A highly sensitive fiber Bragg grating diaphragm pressure transducer, Gary Andrew Allwood, G Wild, Alex S. Lubansky, and Steven Hinckley
Optical fibre Bragg grating sensor based reed switch for physical intrusion detection, G. Allwood, G. Wild, and S. Hinckley
Artificial Insect Algorithms for Routing in Wireless Sensor Systems, Li-Minn Ang, Adamu Murtala Zungeru, Kah Phooi Seng, and Daryoush Habibi
Performance analysis of a low pressure discharge thermal energy combined desalination unit, Alireza Hosseini Araghi, Mehdi Khiadani, Gordon Lucas, and K Hooman
Mechanical Behavior of Porous Commercially Pure Ti And Ti–TiB Composite Materials Manufactured By Selective Laser Melting, Hooyar Attar, L Lober, A Funk, M Calin, Laichang Zhang, K G. Prashanth, S Scudino, Y S. Zhang, and J Eckert
Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes, Hooyar Attar, K. G. Prashanth, A. K. Chaubey, M. Calin, Laichang C. Zhang, S. Scudino, and J. Eckert
Effect of Powder Particle Shape on the Properties of In Situ Ti-TiB Composite Materials Produced by Selective Laser Melting, Hooyar Attar, Konda G. Prashanth, Lai-Chang Zhang, Mariana Calin, Ilya V. Okulov, Sergio Scudino, Chao Yang, and Jurgen Eckert
A modified suction-controlled direct shear device for testing unsaturated soil and steel plate interface, L. Borana, J.-H. Yin, D. N. Singh, and S. K. Shukla
The interplay between renewables penetration, costing and emissions in the sizing of stand-alone hydrogen systems, Adel Brka, Yasir M. Al-Abdeli, and Ganesh Kothapalli
Predictive power management strategies for stand-alone hydrogen systems: Lab-scale validation, Adel Brka, Ganesh Kothapalli, and Yasir M. Al-Abdeli
Zr-Sn-Nb-Fe-Si-O alloy for fuel cladding candidate: Processing, microstructure, corrosion resistance and tensile behavior, Liangyu Chen, Jiuxiao Li, Yao Zhang, Lai-Chang Zhang, Weijie Lu, Liqiang Wang, Lefu Zhang, and Di Zhang
Effects of alloyed Si on the autoclave corrosion performance and periodic corrosion kinetics in Zr-Sn-Nb-Fe-O alloys, Liangyu Chen, Jiuxiao Li, Yao Zhang, Lai-Chang Zhang, Weijie Lu, Lefu Zhang, Liqiang Wang, and Di Zhang
Comparison of Simulation Methods for Recharge Mounds Under Rectangular Basins, Kudzai Chipongo and Mehdi Khiadani
Multi-objective optimisation of renewable hybrid energy systems with desalination, Daniel P. Clarke, Yasir M. Al-Abdeli, and Ganesh Kothapalli
Improving battery lifetime of gridable vehicles and system reliability in the smart grid, Uttam Kumar Debnath, Iftekhar Ahmad, Daryoush Habibi, and Ahmed Yusef Saber
Energy storage model with gridable vehicles for economic load dispatch in the smart grid, Uttan Kumar Debnath, Iftekhar Ahmad, Daryoush Habibi, and Ahmed Yousuf Saber
Effect of α″ martensite on the microstructure and mechanical properties of beta-type Ti-Fe-Ta alloys, S. Ehtemam Haghighi, H. B. Lu, G. Y. Jian, G. H. Cao, Daryoush Habibi, and Laichang Zhang
Electrical and optical properties of nitrogen doped SnO2 thin films deposited on flexible substrates by magnetron sputtering, Feng Fang, Yeyu Zhang, Xiaoqui Wu, Qiyue Shao, and Zonghan Xie
Microstructure and mechanical properties of cold-drawn pearlitic wires affect by inherited texture, Feng Fang, Lichu Zhou, Xianjun Hu, Xuefeng Zhou, Yiyou Tu, Zonghan Xie, and Jianqing Jiang
The effect of clay type and dispersion conditions on electroosmotic consolidation behaviour of model kaolinite and Na-exchanged smectite pulps, Andrew Harris, Ataollah Nosrati, and Jonas Addai-Mensah
Efficiency of a combined desalination and power system utilising a multi-stream heat exchange, Alireza Hosseini Araghi, Mehdi Khiadani, and Gordon Lucas
Efficiency of a combined desalination and power system utilising a multi-stream heat exchanger, Alireza Hosseini Araghi, Mehdi Khiadani, and Gordon Lucas
Appraisal of the support vector machine to forecast residential heating demand for the District Heating System based on the monthly overall natural gas consumption, Nima Izadar, Hossain Ghadamian, Hwai Chyuan Ong, Zeinab Moghaddam, Chong Wen Tong, and Shahaboddin Shamshirband
An overview of processes and considerations in the modelling of fixed-bed biomass combustion, Hassan Khodaei Jalalabadi, Yasir Al-Abdeli, Ferdinando G. Guzzomi, and Guan H. Yeoh
Blurring and deblurring digital images using the dihedral group, Husein Hadi Abbas Jassim, Zahir M. Hussain, Hind R.M. Shaaban, and Kawther B.R. Al-dbag
Stress-strain characteristics of fiber-reinforced rice husk ash, J. N. Jha, K. S. Gill, A. K. Choudhary, and S. K. Shukla
Creep-Fatigue Interaction and Cyclic Strain Analysis in P92 Steel Based on Test, Dongmei Ji, Lai-Chang Zhang, Jianxing Ren, and Dexian Wang
Effect of submergence on settlement and bearing capacity of surface strip footing on geotextile-reinforced sand bed, Monir Kazi, Sanjay K. Shukla, and Daryoush Habibi
An improved method to increase the load-bearing capacity of strip footing resting on geotextile-reinforced sand bed, Monir Kazi, Sanjay Kumar Shukla, and Daryoush Habibi
Behavior of embedded strip footing on sand bed reinforced with multilayer geotextile with wraparound ends, Monir Kazi, S. K. Shukla, and Daryoush Habibi
Fast and efficient lossless adaptive compression scheme for wireless sensor networks, Jonathan Gana Kolo, S Anandan Shanmugam, David Wee Lim, and Li-Minn Ang
A Comprehensive Survey of Modern Symmetric Cryptographic Solutions for Resource Constrained Environments, Jia Hao Kong, Li-Minn Ang, and Kah Phooi Seng
Electrical resistivity of iron ore mine tailings produced in Western Australia, Francis A. Kuranchie, Sanjay K. Shukla, and Daryoush Habibi
Utilisation of iron ore tailings as aggregates in concrete, Francis Atta Kuranchie, Sanjay Kumar Shukla, Daryoush Habibi, and Alireza Mohyeddin
Uninformed pathfinding: A new approach, Kai Li Lim, Kah Phooi Seng, Lee Seng Yeong, Li-Minn Ang, and Sue Inn Ch’ng
Facile preparation of rare-earth semiconductor nanocrystals and tuning of their dimensionalities, Hechun Lin, Qiangian Luo, Wen-Yi Tong, Chunli Jiang, Rong Huang, Hui Peng, Lai-Chang Zhang, Jadranka Travas-Sejdic, and Chun-Gang Duan
PEIE capped ZnO as cathode buffer layer with enhanced charge transfer ability for high efficiency polymer solar cells, Ping Li, Lun Cai, Gang Wang, Da Chen Zhou, Jin Xiang, Yu Jun Zhang, Bao Fu Ding, Kamal Alameh, and Qun Liang Song
Ultrafine grained Ti-based composites with ultrahigh strength and ductility achieved by equiaxing microstructure, L. H. Liu, C Yang, F. Wang, S. G. Qu, X. Q. Li, W. W. Zhang, Y. Y. Li, and Laichang C. Zhang
Processing and properties of topologically optimised biomedical Ti-24Nb-4Zr-8Sn scaffolds manufactured by selective laser melting, Yujing Liu, X. P. Li, Laichang C. Zhang, and T. B. Sercombe
A Selective Laser Melting And Solution Heat Treatment Refined Al–12Si Alloy With A Controllable Ultrafine Eutectic Microstructure And 25% Tensile Ductility, Xiaopeng Li, Xiaojun Wang, Martine Saunders, Alexandra Suvorova, Laichang Zhang, Yujing Liu, Minghao Fang, Zhaohui Huang, and Timothy B. Sercombe
Effect of substrate temperature on the interface bond between support and substrate during selective laser melting of Al-Ni-Y-Co-La metallic glass, X. P. Li, M. Roberts, Y. J. Liu, C. W. Kang, H. Huang, and T. B. Sercombe
On using planar microcontractions for extensional rheometry, Alex S. Lubansky and Miccal T. Matthews
Acid leaching and rheological behaviour of a siliceous goethitic nickel laterite ore: Influence of particle size and temperature, Jennifer MacCarthy, Ataollah Nosrati, William Skinner, and Jonas Addai-Mensah
Effect of mineralogy and temperature on atmospheric acid leaching and rheological behaviour of model oxide and clay mineral dispersions, Jennifer MacCarthy, Ataollah Nosrati, William Skinner, and Jonas Addai-Mensah
An efficient strategy for covering array construction with fuzzy logic-based adaptive swarm optimization for software testing use, Thair Mahmoud and Bestoun S. Ahmed
Modelling self-optimised short term load forecasting for medium voltage loads using tunning fuzzy systems and Artificial Neural Networks, Thair S. Mahmoud, Daryoush Habibi, Mohammed Hassan, and Octavian Bass
Photocatalytic Degradation of the Azo Dye Acid Red 14 in Nanosized TiO2 Suspension under Simulated Solar Light, Jing Miao, Hai-Bo Lu, Daryoush Habibi, Mehdi Khiadani, and Lai-Chang Zhang
Investigation of Anti-Alga Properties and Anti-Bacteria Effects of Composite Nanofiltration Membranes Based on Chitosan Derivatives, J. Miao, H.C. Lin, and Laichang Zhang
High Strength Beta Titanium Alloys: New Design Approach, Ilya V. Okulov, Horst Wendrock, Aleksey S. Volegov, Hooyar Attar, Uta Kuhn, Werner Skrotzki, and Jürgen Eckert
Electrical resistivity of sandy soil, Lopa Mudra Pandey
Production of high strength Al85Nd8Ni5Co2 alloy by selective laser melting, K. G. Prashanth, H. Shakur Shahabi, Hooyar Attar, V. C. Srivastava, N. Ellendt, V. Uhlenwinkel, J. Eckert, and S. Scudino
Influence of binder composition on hematite-rich mixed minerals agglomeration behaviour and product properties, Ishmael Quaicoe, Ataollah Nosrati, and Jonas Addai-Mensah
Effect of freeboard deflectors on the temperature distribution in packed beds, Babak Rashidian, Yasir M. Al-Abdeli, Guan H. Yeoh, and Ferdinando G. Guzzomi
Superconducting Magnetic Energy Storage Unit for Damping Enhancement of a Wind Farm Generation System, Embaiya Salih, Stefan Lachowicz, Octavian Bass, and Daryoush Habibi
Temperature effects on the performance of RuO2 thin-film pH sensor, Ali Sardarinejad, D. K. Maurya, M. Khaled, and Kamal Alameh
Additive manufacturing of Cu-10Sn bronze, S. Scudino, C. Unterdörfer, K. G. Prashanth, Hooyar Attar, N. Ellendt, V. Uhlenwinkel, and J. Eckert
Semi-analytical Solutions of Multiprocessing Non-equilibrium Transport Equations with Linear and Exponential Distance-Dependent Dispersivity, Pramod Kumar Sharma, C.S.P. Ojha, Deepak Swami, Nitin Joshi, and Sanjay Kumar Shukla
Generalized analytical expression for dynamic active thrust from c-φ soil backfills, Sanjay K. Shukla
A note on void ratio of fibre-reinforced soils, Sanjay Kumar Shukla, Mohamed A. Shahin, and Hazim Abu-Taleb
Sustainable water management at major Australian regional airports: The case of Mildura Airport, Alexander Somerville, Glenn S. Baxter, Steven Richardson, and Graham Wild
A forecasting Tool for Predicting Australia's Domestic Airline Passenger Demand Using a Genetic Algorithm, Panarat Srisaeng, Glenn Baxter, Steven Richardson, and Graham Wild
Water quantity and quality assessment on a tertiary treatment wetland in a tropical climate, Guangzhi Sun, Tanveer F. Saeed, Guangxin Zhang, and Nagaratnam Sivakugan
The Removal of Heavy Metals From an Acidic Wastewater in Treatment Wetlands Filled With Recycled Materials, Guangzhi Sun, Cameron Wycherley, and Yong Sun
A real-time plant discrimination system utilising discrete reflectance spectroscopy, Paul Symonds, Arie Paap, Kamal Alameh, J Rowe, and C Miller
Improving processing by adaption to conditional geostatistical simulation of block compositions, R. Tolosana-Delgado, Ute A. Mueller, K. G. van den Boogaart, C. Ward, and J. Gutzmer
Ultrafine Processing Of (TiB+TiC)/TC18 Composites Processed By ECAP Via Bc Route, Liqiang Wang, Xueting Wang, Laichang Zhang, and Weijie Lu
Investigation of Deformation Mechanisms in β-Type Ti-35Nb-2Ta-3Zr Alloy via FSP Leading to Surface Strengthening, Liquang Wang, Jiao Qu, Liangyu Chen, Qiang Meng, Lai-Chang Zhang, Jining Qin, Di Zhang, and Weijie Lu
Identifying the regional-scale groundwater-surface water interaction on the Sanjiang Plain, Northeast China, Xihua Wang, Guangxin Zhang, Y. Jun Xu, and Guanzhi Sun
Analytical modeling of power detection-based interrogation methods for fiber Bragg grating sensors for system optimization, Graham Wild and Steven Richardson
Promoting bone-like apatite formation on titanium alloys through nanocrystalline tantalum nitride coatings, Jiang Xu, Linlin Liu, Paul Munroe, and Zong-Han Xie
A fast approach for preparation of adsorbent from reed black liquor and its performance in equilibrium and kinetic gas separation, G. Yang, Yong Sun, C. Wen, and J. Zhang
LES and multi-step chemical reaction in compartment fires, A.C.Y. Yuen, G.H. Yeoh, V. Timchenko, and T. Barber
Boride precipitation and mechanical behaviour of high boron stainless steel with boron and titanium additions, Xiao-Qiu Zheng, Ying Liu, Jun Li, Lin He, and Lai-Chang Zhang
Submissions from 2014
Solar Energy Harvesting Clear Glass For Building-integrated Photovoltaics, Kamal Alameh, Mikhail Vasiliev, Ramzy Alghamedi, Mohammad Alam, and V. Rosenberg
Growth, Characterisation, And Properties of Bi1.8Lu1.2Fe3.6Al1.4O12 Garnet Films Prepared Using Two Different Substrate Temperatures, Mohammad Alam, Mikhail Vasiliev, and Kamal Alameh
Spectrally-selective all-inorganic scattering luminophores for solar energy-harvesting clear glass windows, Ramzy Alghamedi, Mikhail Vasiliev, Mohammad Alam, and Kamal Alameh
Frequency Estimation Of Single-Tone Sinusoids Under Additive And Phase Noise, Asmaa Nazar Almoosawy, Zahir Hussain, and Fadel A. Murad
Simulation vs. measurement of polyaniline for electromagnetic interference shielding, Whamid Al-Shabib
Effect Of Quenching Media, Specimen Size And Shape On The Hardenability Of AISI 4140 Steel, Ali R. Altaweel and Majid Tolouei Rad
Validation of linear and non-linear kinetic modeling of saline wastewater treatment by sequencing batch reactor with adapted and non-adapted consortiums, Mohammad Mehdi Amin, Mehdi H. Khiadani (Hajian), Ali Fatehizadeh, and Ensiyeh Taheri
Unique corrosion behavior of Fe78Si9B13 glassy alloy with different circumferential speeds under various chloride ion levels, B An, Y J. Li, Y Liu, Y G. Wang, Laichang Zhang, and W M. Wang
Selective laser melting of in situ titanium–titanium boride composites: Processing, microstructure and mechanical properties, Hooyar Attar, Matthias Bonisch, Mariana Calin, Lai-Chang Zhang, Sergio Scudino, and Jurgen Eckert
Comparative study of microstructures and mechanical properties of in situ Ti-TiB composites produced by selective laser melting, powder metallurgy, and casting technologies, Hooyar Attar, M Bönisch, M Calin, Laichang C. Zhang, K Zhuravleva, A Funk, S Scudino, C Yang, and J Eckert
Microstructure and mechanical properties of commercially pure titanium produced by additive manufacturing: Effect of heat treatment, Hooyar Attar, Mariana Calin, Laichang C. Zhang, and Jurgen Eckert
High strength titanium-based materials processed by selective laser melting, Hooyar Attar, Mariana Calin, Laichang Zhang, and Jurgen Eckert
Manufacture by selective laser melting and mechanical behavior of commercially pure titanium, Hooyar Attar, Mariana Calin, Laichang Zhang, Sergio Scudino, and Jürgen Eckert
High specific strength and stiffness structures produced using selective laser melting, Vivien J. Challis, Xiaoxue Xu, Laichang Zhang, Anthony P. Roberts, Joseph F. Grotowski, and Timothy B. Sercombe
The effect of rainfall on feature points extraction and image stitching, Wai Chong Chia, Lee Seng Yeong, Sue Inn Ch'Ng, Kah Phooi Seng, and Li-Minn Ang
Utilization of fly ash and waste recycled product reinforced with plastic wastes as construction materials in flexible pavement, A K. Choudhary, J N. Jha, K S. Gill, and Sanjay Kumar Shukla
Seismic Behaviour of Retaining Structures, Design Issues and Requalification Techniques, D Choudhury, A D. Katdare, S K. Shukla, B M. Basha, and P Ghosh
The impact of using Particle Swarm Optimisation on the operational characteristics of a stand-alone hydrogen system with on-site water production, Daniel P. Clarke, Yasir M. Al-Abdeli, and Ganesh Kothapalli